For the sides of this board we used a 1 x 4 pine board and measured it to 14 inches.
He used a square to make a straight line.
He cut the board with a Dewalt Circular Saw.
We took that board and measured the second board to make sure they would be the same size.
For the bottom board we used a 1 x 6 and measured it to 12.5 inches, again using a square to make a straight line.
He cut that with our Dewalt Circular Saw.
He took the bottom board and used it to measure a 1 x 4 to make the sides so they would be the same length. The piece measured approximately 5.5 inches.
He cut 2 of those.
We then sanded the cut edges and all of the boards to get them smooth and ready for staining.
We glued each edge with Elmer’s Wood Glue that would be connecting together.
After each board was glued in place we used our nail gun to secure it.
Paint or stain your box and let dry